Camber kit is designed to achieve negative degrees of camber by extending the level control arms. Ball joint plate adjustable from -3 to -6 degrees of camber. Axle spacers help your cv joints work properly by reducing the stress caused by installing ball joints plates. Extended rods/tie rod ends +20 mm are used to correct toe.
The kit pictured here is compatible with 5 speed manual gearbox. Inner axles diameter is 108 mm. Axle bolts m8x70 mm. Compatible inner cv joint number 1k0498103
A plate for widening the track and add camber. Adjustable from -3 to -6 degrees of camber. Recommended for use with axle spacers and extended tie rods. Do not use axle spacers if you are using tilted sleeves.
The washers in the kit are used to realize the full adjustment range of the ball joints without hitting the level control arms.
Also these kit raise the ball joint higher, thus changing the position of the level control arms to a better position after lowering the car.
Installation requires removal of the studs on the ball joints. Install the plate as shown in the pictures.