Ball joint plates + extended tie rod ends

Compatible with all mk5/mk6/mk7/mk8 Jetta/Golf

Tie rods ends 16x1,5 mm +20 mm extension

Use this kit together with tilted sleeves, in this case axle spacers are not needed.

A plate for widening the track and add camber. Adjustable from -3 to -6 degrees of camber.

The washers in the kit are used to realize the full adjustment range of the ball joints without hitting the level control arms.

Also these kit raise the ball joint higher, thus changing the position of the level control arms to a better position after lowering the car.

Installation requires removal of the studs on the ball joints. Install the plate as shown in the pictures.